bachir
/
mysensors_registre_airchaud
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

0.2

This commit is contained in:
Bachir Soussi Chiadmi 2023-12-10 12:47:03 +01:00
parent c5b402a1b4
commit 3eb2a581bb
1 changed files with 39 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

45
registre_airchaud.ino → registre_airchaud_code.ino
View File

@ -3,31 +3,46 @@
#define MY_RADIO_RF24 #define MY_RADIO_RF24
// #define MY_RF24_PA_LEVEL RF24_PA_MIN // #define MY_RF24_PA_LEVEL RF24_PA_MIN
// #define MY_RF24_PA_LEVEL RF24_PA_LOW // #define MY_RF24_PA_LEVEL RF24_PA_LOW
#define MY_RF24_PA_LEVEL RF24_PA_HIGH // #define MY_RF24_PA_LEVEL RF24_PA_HIGH
//#define MY_RF24_PA_LEVEL RF24_PA_MAX #define MY_RF24_PA_LEVEL RF24_PA_MAX
#define MY_RF24_CHANNEL 14 #define MY_RF24_CHANNEL 14
#define MY_REPEATER_FEATURE #define MY_REPEATER_FEATURE
#define MY_DEFAULT_RX_LED_PIN A0
#define MY_DEFAULT_TX_LED_PIN A1
#define MY_DEFAULT_ERR_LED_PIN A2
#include <SPI.h> #include <SPI.h>
#include <MySensors.h> #include <MySensors.h>
// https://lastminuteengineers.com/multiple-ds18b20-arduino-tutorial/
#include <OneWire.h>
#include <DallasTemperature.h>
// Data wire is plugged into port 11 on the Arduino
#define ONE_WIRE_BUS 7
// Setup a oneWire instance to communicate with any OneWire devices
OneWire oneWire(ONE_WIRE_BUS);
// Pass our oneWire reference to Dallas Temperature.
DallasTemperature sensors(&oneWire);
#define ROTATION_CHILD_ID 0 #define ROTATION_CHILD_ID 0
#define CHILD_ID_TEMP 1
MyMessage dimmerMsg(ROTATION_CHILD_ID, V_DIMMER); MyMessage dimmerMsg(ROTATION_CHILD_ID, V_DIMMER);
MyMessage lightMsg(ROTATION_CHILD_ID, V_LIGHT); // we need init light message to make the dimmer appear in HA MyMessage lightMsg(ROTATION_CHILD_ID, V_LIGHT); // we need init light message to make the dimmer appear in HA
MyMessage msgTemp(CHILD_ID_TEMP, V_TEMP);
/* /*
control a 28BYJ-48 stepper motor with ULN2003 driver board control a 28BYJ-48 stepper motor with ULN2003 driver board
https://www.makerguides.com/28byj-48-stepper-motor-arduino-tutorial/ https://www.makerguides.com/28byj-48-stepper-motor-arduino-tutorial/
*/ */
#include "Stepper.h" #include "Stepper.h"
// Define number of steps per rotation: // Define number of steps per rotation:
const int stepsPerRevolution = 2048; // can be 4096 const int stepsPerRevolution = 2048; // can be 4096
// ULN2003 Wiring: // ULN2003 Wiring:
// Pin 3 to IN1 // Pin 3 to IN1
// Pin 4 to IN2 // Pin 4 to IN2
@ -41,15 +56,21 @@ int prevDimValue=0;
int newDimValue=0; int newDimValue=0;
char convBuffer[10]; char convBuffer[10];
float DTemp;
float old_DTemp;
void presentation() void presentation()
{ {
#ifdef MY_DEBUG #ifdef MY_DEBUG
Serial.println("- - - - - presentation - - - - -"); Serial.println("- - - - - presentation - - - - -");
#endif #endif
sendSketchInfo("Registre Air Chaud", "0.1"); sendSketchInfo("Registre Air Chaud", "0.2");
present(ROTATION_CHILD_ID, S_DIMMER, "rotation"); present(ROTATION_CHILD_ID, S_DIMMER, "rotation");
present(CHILD_ID_TEMP, S_TEMP, "Temperature");
} }
void setup() { void setup() {
@ -63,12 +84,24 @@ void setup() {
send(dimmerMsg.set(prevDimValue)); send(dimmerMsg.set(prevDimValue));
send(lightMsg.set(1)); send(lightMsg.set(1));
sensors.begin();
} }
void loop() { void loop() {
#ifdef MY_DEBUG #ifdef MY_DEBUG
// Serial.println("- - - - - loop - - - - -"); // Serial.println("- - - - - loop - - - - -");
#endif #endif
sensors.requestTemperatures();
old_DTemp = DTemp;
DTemp = sensors.getTempCByIndex(0);
if (DTemp != old_DTemp && DTemp != -127)
{
send(msgTemp.set(DTemp, 1));
old_DTemp = DTemp;
}
delay(5000); delay(5000);
} }