From 3eb2a581bba75adae772a109559244d3891112ea Mon Sep 17 00:00:00 2001
From: bach <bachir@figureslibres.io>
Date: Sun, 10 Dec 2023 12:47:03 +0100
Subject: [PATCH] 0.2

---
 ...airchaud.ino => registre_airchaud_code.ino | 45 ++++++++++++++++---
 1 file changed, 39 insertions(+), 6 deletions(-)
 rename registre_airchaud.ino => registre_airchaud_code.ino (74%)

diff --git a/registre_airchaud.ino b/registre_airchaud_code.ino
similarity index 74%
rename from registre_airchaud.ino
rename to registre_airchaud_code.ino
index 5218440..76e96d6 100644
--- a/registre_airchaud.ino
+++ b/registre_airchaud_code.ino
@@ -3,31 +3,46 @@
 #define MY_RADIO_RF24
 // #define MY_RF24_PA_LEVEL RF24_PA_MIN
 // #define MY_RF24_PA_LEVEL RF24_PA_LOW
-#define MY_RF24_PA_LEVEL RF24_PA_HIGH
-//#define MY_RF24_PA_LEVEL RF24_PA_MAX
+// #define MY_RF24_PA_LEVEL RF24_PA_HIGH
+#define MY_RF24_PA_LEVEL RF24_PA_MAX
 
 #define MY_RF24_CHANNEL 14
 
 #define MY_REPEATER_FEATURE
 
+#define MY_DEFAULT_RX_LED_PIN A0
+#define MY_DEFAULT_TX_LED_PIN A1
+#define MY_DEFAULT_ERR_LED_PIN A2
+
 #include <SPI.h>
 #include <MySensors.h>
 
+// https://lastminuteengineers.com/multiple-ds18b20-arduino-tutorial/
+#include <OneWire.h>
+#include <DallasTemperature.h>
+
+// Data wire is plugged into port 11 on the Arduino
+#define ONE_WIRE_BUS 7
+// Setup a oneWire instance to communicate with any OneWire devices
+OneWire oneWire(ONE_WIRE_BUS);
+
+// Pass our oneWire reference to Dallas Temperature.
+DallasTemperature sensors(&oneWire);
+
 #define ROTATION_CHILD_ID 0
+#define CHILD_ID_TEMP 1
 
 MyMessage dimmerMsg(ROTATION_CHILD_ID, V_DIMMER);
 MyMessage lightMsg(ROTATION_CHILD_ID, V_LIGHT); // we need init light message to make the dimmer appear in HA
+MyMessage msgTemp(CHILD_ID_TEMP, V_TEMP);
 
 /* 
 control a 28BYJ-48 stepper motor with ULN2003 driver board
 https://www.makerguides.com/28byj-48-stepper-motor-arduino-tutorial/
 */
-
 #include "Stepper.h"
-
 // Define number of steps per rotation:
 const int stepsPerRevolution = 2048; // can be 4096
-
 // ULN2003 Wiring:
 // Pin 3 to IN1
 // Pin 4 to IN2
@@ -41,15 +56,21 @@ int prevDimValue=0;
 int newDimValue=0;
 char convBuffer[10];
 
+
+float DTemp;
+float old_DTemp;
+
+
 void presentation()  
 { 
   #ifdef MY_DEBUG
     Serial.println("- - - - - presentation - - - - -");
   #endif
   
-  sendSketchInfo("Registre Air Chaud", "0.1");
+  sendSketchInfo("Registre Air Chaud", "0.2");
 
   present(ROTATION_CHILD_ID, S_DIMMER, "rotation");
+  present(CHILD_ID_TEMP, S_TEMP, "Temperature");
 }
 
 void setup() {
@@ -63,12 +84,24 @@ void setup() {
   
   send(dimmerMsg.set(prevDimValue));
   send(lightMsg.set(1));
+
+  sensors.begin();
 }
 
 void loop() {
   #ifdef MY_DEBUG
     // Serial.println("- - - - - loop - - - - -");
   #endif
+
+  sensors.requestTemperatures();
+  old_DTemp = DTemp;
+  DTemp = sensors.getTempCByIndex(0);
+  if (DTemp != old_DTemp && DTemp != -127)
+  {
+    send(msgTemp.set(DTemp, 1));
+    old_DTemp = DTemp;
+  }
+  
   delay(5000);
 }