folder files

.gitignore

@@ -3,8 +3,8 @@ vendor/*
 vendor/.*
 
 web/modules/contrib/*
-web/sites/default/files/*
-web/sites/default/files/.*
+#web/sites/default/files/*
+#web/sites/default/files/.*
 web/sites/default/settings.php
 web/sites/*/files
 

web/sites/default/online_settings.php

@@ -1,804 +0,0 @@
-<?php
-
-// @codingStandardsIgnoreFile
-
-/**
- * @file
- * Drupal site-specific configuration file.
- *
- * IMPORTANT NOTE:
- * This file may have been set to read-only by the Drupal installation program.
- * If you make changes to this file, be sure to protect it again after making
- * your modifications. Failure to remove write permissions to this file is a
- * security risk.
- *
- * In order to use the selection rules below the multisite aliasing file named
- * sites/sites.php must be present. Its optional settings will be loaded, and
- * the aliases in the array $sites will override the default directory rules
- * below. See sites/example.sites.php for more information about aliases.
- *
- * The configuration directory will be discovered by stripping the website's
- * hostname from left to right and pathname from right to left. The first
- * configuration file found will be used and any others will be ignored. If no
- * other configuration file is found then the default configuration file at
- * 'sites/default' will be used.
- *
- * For example, for a fictitious site installed at
- * https://www.drupal.org:8080/mysite/test/, the 'settings.php' file is searched
- * for in the following directories:
- *
- * - sites/8080.www.drupal.org.mysite.test
- * - sites/www.drupal.org.mysite.test
- * - sites/drupal.org.mysite.test
- * - sites/org.mysite.test
- *
- * - sites/8080.www.drupal.org.mysite
- * - sites/www.drupal.org.mysite
- * - sites/drupal.org.mysite
- * - sites/org.mysite
- *
- * - sites/8080.www.drupal.org
- * - sites/www.drupal.org
- * - sites/drupal.org
- * - sites/org
- *
- * - sites/default
- *
- * Note that if you are installing on a non-standard port number, prefix the
- * hostname with that number. For example,
- * https://www.drupal.org:8080/mysite/test/ could be loaded from
- * sites/8080.www.drupal.org.mysite.test/.
- *
- * @see example.sites.php
- * @see \Drupal\Core\DrupalKernel::getSitePath()
- *
- * In addition to customizing application settings through variables in
- * settings.php, you can create a services.yml file in the same directory to
- * register custom, site-specific service definitions and/or swap out default
- * implementations with custom ones.
- */
-
-/**
- * Database settings:
- *
- * The $databases array specifies the database connection or
- * connections that Drupal may use.  Drupal is able to connect
- * to multiple databases, including multiple types of databases,
- * during the same request.
- *
- * One example of the simplest connection array is shown below. To use the
- * sample settings, copy and uncomment the code below between the @code and
- * @endcode lines and paste it after the $databases declaration. You will need
- * to replace the database username and password and possibly the host and port
- * with the appropriate credentials for your database system.
- *
- * The next section describes how to customize the $databases array for more
- * specific needs.
- *
- * @code
- * $databases['default']['default'] = [
- *   'database' => 'databasename',
- *   'username' => 'sqlusername',
- *   'password' => 'sqlpassword',
- *   'host' => 'localhost',
- *   'port' => '3306',
- *   'driver' => 'mysql',
- *   'prefix' => '',
- *   'collation' => 'utf8mb4_general_ci',
- * ];
- * @endcode
- */
-$databases = [];
-
-/**
- * Customizing database settings.
- *
- * Many of the values of the $databases array can be customized for your
- * particular database system. Refer to the sample in the section above as a
- * starting point.
- *
- * The "driver" property indicates what Drupal database driver the
- * connection should use.  This is usually the same as the name of the
- * database type, such as mysql or sqlite, but not always.  The other
- * properties will vary depending on the driver.  For SQLite, you must
- * specify a database file name in a directory that is writable by the
- * webserver.  For most other drivers, you must specify a
- * username, password, host, and database name.
- *
- * Drupal core implements drivers for mysql, pgsql, and sqlite. Other drivers
- * can be provided by contributed or custom modules. To use a contributed or
- * custom driver, the "namespace" property must be set to the namespace of the
- * driver. The code in this namespace must be autoloadable prior to connecting
- * to the database, and therefore, prior to when module root namespaces are
- * added to the autoloader. To add the driver's namespace to the autoloader,
- * set the "autoload" property to the PSR-4 base directory of the driver's
- * namespace. This is optional for projects managed with Composer if the
- * driver's namespace is in Composer's autoloader.
- *
- * Transaction support is enabled by default for all drivers that support it,
- * including MySQL. To explicitly disable it, set the 'transactions' key to
- * FALSE.
- * Note that some configurations of MySQL, such as the MyISAM engine, don't
- * support it and will proceed silently even if enabled. If you experience
- * transaction related crashes with such configuration, set the 'transactions'
- * key to FALSE.
- *
- * For each database, you may optionally specify multiple "target" databases.
- * A target database allows Drupal to try to send certain queries to a
- * different database if it can but fall back to the default connection if not.
- * That is useful for primary/replica replication, as Drupal may try to connect
- * to a replica server when appropriate and if one is not available will simply
- * fall back to the single primary server (The terms primary/replica are
- * traditionally referred to as master/slave in database server documentation).
- *
- * The general format for the $databases array is as follows:
- * @code
- * $databases['default']['default'] = $info_array;
- * $databases['default']['replica'][] = $info_array;
- * $databases['default']['replica'][] = $info_array;
- * $databases['extra']['default'] = $info_array;
- * @endcode
- *
- * In the above example, $info_array is an array of settings described above.
- * The first line sets a "default" database that has one primary database
- * (the second level default).  The second and third lines create an array
- * of potential replica databases.  Drupal will select one at random for a given
- * request as needed.  The fourth line creates a new database with a name of
- * "extra".
- *
- * You can optionally set prefixes for some or all database table names
- * by using the 'prefix' setting. If a prefix is specified, the table
- * name will be prepended with its value. Be sure to use valid database
- * characters only, usually alphanumeric and underscore. If no prefixes
- * are desired, leave it as an empty string ''.
- *
- * To have all database names prefixed, set 'prefix' as a string:
- * @code
- *   'prefix' => 'main_',
- * @endcode
- *
- * Per-table prefixes are deprecated as of Drupal 8.2, and will be removed in
- * Drupal 9.0. After that, only a single prefix for all tables will be
- * supported.
- *
- * To provide prefixes for specific tables, set 'prefix' as an array.
- * The array's keys are the table names and the values are the prefixes.
- * The 'default' element is mandatory and holds the prefix for any tables
- * not specified elsewhere in the array. Example:
- * @code
- *   'prefix' => [
- *     'default'   => 'main_',
- *     'users'     => 'shared_',
- *     'sessions'  => 'shared_',
- *     'role'      => 'shared_',
- *     'authmap'   => 'shared_',
- *   ],
- * @endcode
- * You can also use a reference to a schema/database as a prefix. This may be
- * useful if your Drupal installation exists in a schema that is not the default
- * or you want to access several databases from the same code base at the same
- * time.
- * Example:
- * @code
- *   'prefix' => [
- *     'default'   => 'main.',
- *     'users'     => 'shared.',
- *     'sessions'  => 'shared.',
- *     'role'      => 'shared.',
- *     'authmap'   => 'shared.',
- *   ];
- * @endcode
- * NOTE: MySQL and SQLite's definition of a schema is a database.
- *
- * Advanced users can add or override initial commands to execute when
- * connecting to the database server, as well as PDO connection settings. For
- * example, to enable MySQL SELECT queries to exceed the max_join_size system
- * variable, and to reduce the database connection timeout to 5 seconds:
- * @code
- * $databases['default']['default'] = [
- *   'init_commands' => [
- *     'big_selects' => 'SET SQL_BIG_SELECTS=1',
- *   ],
- *   'pdo' => [
- *     PDO::ATTR_TIMEOUT => 5,
- *   ],
- * ];
- * @endcode
- *
- * WARNING: The above defaults are designed for database portability. Changing
- * them may cause unexpected behavior, including potential data loss. See
- * https://www.drupal.org/developing/api/database/configuration for more
- * information on these defaults and the potential issues.
- *
- * More details can be found in the constructor methods for each driver:
- * - \Drupal\Core\Database\Driver\mysql\Connection::__construct()
- * - \Drupal\Core\Database\Driver\pgsql\Connection::__construct()
- * - \Drupal\Core\Database\Driver\sqlite\Connection::__construct()
- *
- * Sample Database configuration format for PostgreSQL (pgsql):
- * @code
- *   $databases['default']['default'] = [
- *     'driver' => 'pgsql',
- *     'database' => 'databasename',
- *     'username' => 'sqlusername',
- *     'password' => 'sqlpassword',
- *     'host' => 'localhost',
- *     'prefix' => '',
- *   ];
- * @endcode
- *
- * Sample Database configuration format for SQLite (sqlite):
- * @code
- *   $databases['default']['default'] = [
- *     'driver' => 'sqlite',
- *     'database' => '/path/to/databasefilename',
- *   ];
- * @endcode
- *
- * Sample Database configuration format for a driver in a contributed module:
- * @code
- *   $databases['default']['default'] = [
- *     'driver' => 'mydriver',
- *     'namespace' => 'Drupal\mymodule\Driver\Database\mydriver',
- *     'autoload' => 'modules/mymodule/src/Driver/Database/mydriver/',
- *     'database' => 'databasename',
- *     'username' => 'sqlusername',
- *     'password' => 'sqlpassword',
- *     'host' => 'localhost',
- *     'prefix' => '',
- *   ];
- * @endcode
- */
-
-/**
- * Location of the site configuration files.
- *
- * The $settings['config_sync_directory'] specifies the location of file system
- * directory used for syncing configuration data. On install, the directory is
- * created. This is used for configuration imports.
- *
- * The default location for this directory is inside a randomly-named
- * directory in the public files path. The setting below allows you to set
- * its location.
- */
-# $settings['config_sync_directory'] = '/directory/outside/webroot';
-
-/**
- * Settings:
- *
- * $settings contains environment-specific configuration, such as the files
- * directory and reverse proxy address, and temporary configuration, such as
- * security overrides.
- *
- * @see \Drupal\Core\Site\Settings::get()
- */
-
-/**
- * Salt for one-time login links, cancel links, form tokens, etc.
- *
- * This variable will be set to a random value by the installer. All one-time
- * login links will be invalidated if the value is changed. Note that if your
- * site is deployed on a cluster of web servers, you must ensure that this
- * variable has the same value on each server.
- *
- * For enhanced security, you may set this variable to the contents of a file
- * outside your document root; you should also ensure that this file is not
- * stored with backups of your database.
- *
- * Example:
- * @code
- *   $settings['hash_salt'] = file_get_contents('/home/example/salt.txt');
- * @endcode
- */
-$settings['hash_salt'] = '';
-
-/**
- * Deployment identifier.
- *
- * Drupal's dependency injection container will be automatically invalidated and
- * rebuilt when the Drupal core version changes. When updating contributed or
- * custom code that changes the container, changing this identifier will also
- * allow the container to be invalidated as soon as code is deployed.
- */
-# $settings['deployment_identifier'] = \Drupal::VERSION;
-
-/**
- * Access control for update.php script.
- *
- * If you are updating your Drupal installation using the update.php script but
- * are not logged in using either an account with the "Administer software
- * updates" permission or the site maintenance account (the account that was
- * created during installation), you will need to modify the access check
- * statement below. Change the FALSE to a TRUE to disable the access check.
- * After finishing the upgrade, be sure to open this file again and change the
- * TRUE back to a FALSE!
- */
-$settings['update_free_access'] = FALSE;
-
-/**
- * External access proxy settings:
- *
- * If your site must access the Internet via a web proxy then you can enter the
- * proxy settings here. Set the full URL of the proxy, including the port, in
- * variables:
- * - $settings['http_client_config']['proxy']['http']: The proxy URL for HTTP
- *   requests.
- * - $settings['http_client_config']['proxy']['https']: The proxy URL for HTTPS
- *   requests.
- * You can pass in the user name and password for basic authentication in the
- * URLs in these settings.
- *
- * You can also define an array of host names that can be accessed directly,
- * bypassing the proxy, in $settings['http_client_config']['proxy']['no'].
- */
-# $settings['http_client_config']['proxy']['http'] = 'http://proxy_user:proxy_pass@example.com:8080';
-# $settings['http_client_config']['proxy']['https'] = 'http://proxy_user:proxy_pass@example.com:8080';
-# $settings['http_client_config']['proxy']['no'] = ['127.0.0.1', 'localhost'];
-
-/**
- * Reverse Proxy Configuration:
- *
- * Reverse proxy servers are often used to enhance the performance
- * of heavily visited sites and may also provide other site caching,
- * security, or encryption benefits. In an environment where Drupal
- * is behind a reverse proxy, the real IP address of the client should
- * be determined such that the correct client IP address is available
- * to Drupal's logging, statistics, and access management systems. In
- * the most simple scenario, the proxy server will add an
- * X-Forwarded-For header to the request that contains the client IP
- * address. However, HTTP headers are vulnerable to spoofing, where a
- * malicious client could bypass restrictions by setting the
- * X-Forwarded-For header directly. Therefore, Drupal's proxy
- * configuration requires the IP addresses of all remote proxies to be
- * specified in $settings['reverse_proxy_addresses'] to work correctly.
- *
- * Enable this setting to get Drupal to determine the client IP from the
- * X-Forwarded-For header. If you are unsure about this setting, do not have a
- * reverse proxy, or Drupal operates in a shared hosting environment, this
- * setting should remain commented out.
- *
- * In order for this setting to be used you must specify every possible
- * reverse proxy IP address in $settings['reverse_proxy_addresses'].
- * If a complete list of reverse proxies is not available in your
- * environment (for example, if you use a CDN) you may set the
- * $_SERVER['REMOTE_ADDR'] variable directly in settings.php.
- * Be aware, however, that it is likely that this would allow IP
- * address spoofing unless more advanced precautions are taken.
- */
-# $settings['reverse_proxy'] = TRUE;
-
-/**
- * Specify every reverse proxy IP address in your environment.
- * This setting is required if $settings['reverse_proxy'] is TRUE.
- */
-# $settings['reverse_proxy_addresses'] = ['a.b.c.d', ...];
-
-/**
- * Reverse proxy trusted headers.
- *
- * Sets which headers to trust from your reverse proxy.
- *
- * Common values are:
- * - \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL
- * - \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED
- *
- * Note the default value of
- * @code
- * \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL | \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED
- * @endcode
- * is not secure by default. The value should be set to only the specific
- * headers the reverse proxy uses. For example:
- * @code
- * \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL
- * @endcode
- * This would trust the following headers:
- * - X_FORWARDED_FOR
- * - X_FORWARDED_HOST
- * - X_FORWARDED_PROTO
- * - X_FORWARDED_PORT
- *
- * @see \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL
- * @see \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED
- * @see \Symfony\Component\HttpFoundation\Request::setTrustedProxies
- */
-# $settings['reverse_proxy_trusted_headers'] = \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL | \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED;
-
-
-/**
- * Page caching:
- *
- * By default, Drupal sends a "Vary: Cookie" HTTP header for anonymous page
- * views. This tells a HTTP proxy that it may return a page from its local
- * cache without contacting the web server, if the user sends the same Cookie
- * header as the user who originally requested the cached page. Without "Vary:
- * Cookie", authenticated users would also be served the anonymous page from
- * the cache. If the site has mostly anonymous users except a few known
- * editors/administrators, the Vary header can be omitted. This allows for
- * better caching in HTTP proxies (including reverse proxies), i.e. even if
- * clients send different cookies, they still get content served from the cache.
- * However, authenticated users should access the site directly (i.e. not use an
- * HTTP proxy, and bypass the reverse proxy if one is used) in order to avoid
- * getting cached pages from the proxy.
- */
-# $settings['omit_vary_cookie'] = TRUE;
-
-
-/**
- * Cache TTL for client error (4xx) responses.
- *
- * Items cached per-URL tend to result in a large number of cache items, and
- * this can be problematic on 404 pages which by their nature are unbounded. A
- * fixed TTL can be set for these items, defaulting to one hour, so that cache
- * backends which do not support LRU can purge older entries. To disable caching
- * of client error responses set the value to 0. Currently applies only to
- * page_cache module.
- */
-# $settings['cache_ttl_4xx'] = 3600;
-
-/**
- * Expiration of cached forms.
- *
- * Drupal's Form API stores details of forms in a cache and these entries are
- * kept for at least 6 hours by default. Expired entries are cleared by cron.
- *
- * @see \Drupal\Core\Form\FormCache::setCache()
- */
-# $settings['form_cache_expiration'] = 21600;
-
-/**
- * Class Loader.
- *
- * If the APC extension is detected, the Symfony APC class loader is used for
- * performance reasons. Detection can be prevented by setting
- * class_loader_auto_detect to false, as in the example below.
- */
-# $settings['class_loader_auto_detect'] = FALSE;
-
-/*
- * If the APC extension is not detected, either because APC is missing or
- * because auto-detection has been disabled, auto-loading falls back to
- * Composer's ClassLoader, which is good for development as it does not break
- * when code is moved in the file system. You can also decorate the base class
- * loader with another cached solution than the Symfony APC class loader, as
- * all production sites should have a cached class loader of some sort enabled.
- *
- * To do so, you may decorate and replace the local $class_loader variable. For
- * example, to use Symfony's APC class loader without automatic detection,
- * uncomment the code below.
- */
-/*
-if ($settings['hash_salt']) {
-  $prefix = 'drupal.' . hash('sha256', 'drupal.' . $settings['hash_salt']);
-  $apc_loader = new \Symfony\Component\ClassLoader\ApcClassLoader($prefix, $class_loader);
-  unset($prefix);
-  $class_loader->unregister();
-  $apc_loader->register();
-  $class_loader = $apc_loader;
-}
-*/
-
-/**
- * Authorized file system operations:
- *
- * The Update Manager module included with Drupal provides a mechanism for
- * site administrators to securely install missing updates for the site
- * directly through the web user interface. On securely-configured servers,
- * the Update manager will require the administrator to provide SSH or FTP
- * credentials before allowing the installation to proceed; this allows the
- * site to update the new files as the user who owns all the Drupal files,
- * instead of as the user the webserver is running as. On servers where the
- * webserver user is itself the owner of the Drupal files, the administrator
- * will not be prompted for SSH or FTP credentials (note that these server
- * setups are common on shared hosting, but are inherently insecure).
- *
- * Some sites might wish to disable the above functionality, and only update
- * the code directly via SSH or FTP themselves. This setting completely
- * disables all functionality related to these authorized file operations.
- *
- * @see https://www.drupal.org/node/244924
- *
- * Remove the leading hash signs to disable.
- */
-# $settings['allow_authorize_operations'] = FALSE;
-
-/**
- * Default mode for directories and files written by Drupal.
- *
- * Value should be in PHP Octal Notation, with leading zero.
- */
-# $settings['file_chmod_directory'] = 0775;
-# $settings['file_chmod_file'] = 0664;
-
-/**
- * Public file base URL:
- *
- * An alternative base URL to be used for serving public files. This must
- * include any leading directory path.
- *
- * A different value from the domain used by Drupal to be used for accessing
- * public files. This can be used for a simple CDN integration, or to improve
- * security by serving user-uploaded files from a different domain or subdomain
- * pointing to the same server. Do not include a trailing slash.
- */
-# $settings['file_public_base_url'] = 'http://downloads.example.com/files';
-
-/**
- * Public file path:
- *
- * A local file system path where public files will be stored. This directory
- * must exist and be writable by Drupal. This directory must be relative to
- * the Drupal installation directory and be accessible over the web.
- */
-# $settings['file_public_path'] = 'sites/default/files';
-
-/**
- * Private file path:
- *
- * A local file system path where private files will be stored. This directory
- * must be absolute, outside of the Drupal installation directory and not
- * accessible over the web.
- *
- * Note: Caches need to be cleared when this value is changed to make the
- * private:// stream wrapper available to the system.
- *
- * See https://www.drupal.org/documentation/modules/file for more information
- * about securing private files.
- */
-# $settings['file_private_path'] = '';
-
-/**
- * Temporary file path:
- *
- * A local file system path where temporary files will be stored. This directory
- * must be absolute, outside of the Drupal installation directory and not
- * accessible over the web.
- *
- * If this is not set, the default for the operating system will be used.
- *
- * @see \Drupal\Component\FileSystem\FileSystem::getOsTemporaryDirectory()
- */
-# $settings['file_temp_path'] = '/tmp';
-
-/**
- * Session write interval:
- *
- * Set the minimum interval between each session write to database.
- * For performance reasons it defaults to 180.
- */
-# $settings['session_write_interval'] = 180;
-
-/**
- * String overrides:
- *
- * To override specific strings on your site with or without enabling the Locale
- * module, add an entry to this list. This functionality allows you to change
- * a small number of your site's default English language interface strings.
- *
- * Remove the leading hash signs to enable.
- *
- * The "en" part of the variable name, is dynamic and can be any langcode of
- * any added language. (eg locale_custom_strings_de for german).
- */
-# $settings['locale_custom_strings_en'][''] = [
-#   'forum'      => 'Discussion board',
-#   '@count min' => '@count minutes',
-# ];
-
-/**
- * A custom theme for the offline page:
- *
- * This applies when the site is explicitly set to maintenance mode through the
- * administration page or when the database is inactive due to an error.
- * The template file should also be copied into the theme. It is located inside
- * 'core/modules/system/templates/maintenance-page.html.twig'.
- *
- * Note: This setting does not apply to installation and update pages.
- */
-# $settings['maintenance_theme'] = 'bartik';
-
-/**
- * PHP settings:
- *
- * To see what PHP settings are possible, including whether they can be set at
- * runtime (by using ini_set()), read the PHP documentation:
- * http://php.net/manual/ini.list.php
- * See \Drupal\Core\DrupalKernel::bootEnvironment() for required runtime
- * settings and the .htaccess file for non-runtime settings.
- * Settings defined there should not be duplicated here so as to avoid conflict
- * issues.
- */
-
-/**
- * If you encounter a situation where users post a large amount of text, and
- * the result is stripped out upon viewing but can still be edited, Drupal's
- * output filter may not have sufficient memory to process it.  If you
- * experience this issue, you may wish to uncomment the following two lines
- * and increase the limits of these variables.  For more information, see
- * http://php.net/manual/pcre.configuration.php.
- */
-# ini_set('pcre.backtrack_limit', 200000);
-# ini_set('pcre.recursion_limit', 200000);
-
-/**
- * Configuration overrides.
- *
- * To globally override specific configuration values for this site,
- * set them here. You usually don't need to use this feature. This is
- * useful in a configuration file for a vhost or directory, rather than
- * the default settings.php.
- *
- * Note that any values you provide in these variable overrides will not be
- * viewable from the Drupal administration interface. The administration
- * interface displays the values stored in configuration so that you can stage
- * changes to other environments that don't have the overrides.
- *
- * There are particular configuration values that are risky to override. For
- * example, overriding the list of installed modules in 'core.extension' is not
- * supported as module install or uninstall has not occurred. Other examples
- * include field storage configuration, because it has effects on database
- * structure, and 'core.menu.static_menu_link_overrides' since this is cached in
- * a way that is not config override aware. Also, note that changing
- * configuration values in settings.php will not fire any of the configuration
- * change events.
- */
-# $config['system.site']['name'] = 'My Drupal site';
-# $config['user.settings']['anonymous'] = 'Visitor';
-
-/**
- * Fast 404 pages:
- *
- * Drupal can generate fully themed 404 pages. However, some of these responses
- * are for images or other resource files that are not displayed to the user.
- * This can waste bandwidth, and also generate server load.
- *
- * The options below return a simple, fast 404 page for URLs matching a
- * specific pattern:
- * - $config['system.performance']['fast_404']['exclude_paths']: A regular
- *   expression to match paths to exclude, such as images generated by image
- *   styles, or dynamically-resized images. The default pattern provided below
- *   also excludes the private file system. If you need to add more paths, you
- *   can add '|path' to the expression.
- * - $config['system.performance']['fast_404']['paths']: A regular expression to
- *   match paths that should return a simple 404 page, rather than the fully
- *   themed 404 page. If you don't have any aliases ending in htm or html you
- *   can add '|s?html?' to the expression.
- * - $config['system.performance']['fast_404']['html']: The html to return for
- *   simple 404 pages.
- *
- * Remove the leading hash signs if you would like to alter this functionality.
- */
-# $config['system.performance']['fast_404']['exclude_paths'] = '/\/(?:styles)|(?:system\/files)\//';
-# $config['system.performance']['fast_404']['paths'] = '/\.(?:txt|png|gif|jpe?g|css|js|ico|swf|flv|cgi|bat|pl|dll|exe|asp)$/i';
-# $config['system.performance']['fast_404']['html'] = '<!DOCTYPE html><html><head><title>404 Not Found</title></head><body><h1>Not Found</h1><p>The requested URL "@path" was not found on this server.</p></body></html>';
-
-/**
- * Load services definition file.
- */
-$settings['container_yamls'][] = $app_root . '/' . $site_path . '/services.yml';
-
-/**
- * Override the default service container class.
- *
- * This is useful for example to trace the service container for performance
- * tracking purposes, for testing a service container with an error condition or
- * to test a service container that throws an exception.
- */
-# $settings['container_base_class'] = '\Drupal\Core\DependencyInjection\Container';
-
-/**
- * Override the default yaml parser class.
- *
- * Provide a fully qualified class name here if you would like to provide an
- * alternate implementation YAML parser. The class must implement the
- * \Drupal\Component\Serialization\SerializationInterface interface.
- */
-# $settings['yaml_parser_class'] = NULL;
-
-/**
- * Trusted host configuration.
- *
- * Drupal core can use the Symfony trusted host mechanism to prevent HTTP Host
- * header spoofing.
- *
- * To enable the trusted host mechanism, you enable your allowable hosts
- * in $settings['trusted_host_patterns']. This should be an array of regular
- * expression patterns, without delimiters, representing the hosts you would
- * like to allow.
- *
- * For example:
- * @code
- * $settings['trusted_host_patterns'] = [
- *   '^www\.example\.com$',
- * ];
- * @endcode
- * will allow the site to only run from www.example.com.
- *
- * If you are running multisite, or if you are running your site from
- * different domain names (eg, you don't redirect http://www.example.com to
- * http://example.com), you should specify all of the host patterns that are
- * allowed by your site.
- *
- * For example:
- * @code
- * $settings['trusted_host_patterns'] = [
- *   '^example\.com$',
- *   '^.+\.example\.com$',
- *   '^example\.org$',
- *   '^.+\.example\.org$',
- * ];
- * @endcode
- * will allow the site to run off of all variants of example.com and
- * example.org, with all subdomains included.
- */
-
-/**
- * The default list of directories that will be ignored by Drupal's file API.
- *
- * By default ignore node_modules and bower_components folders to avoid issues
- * with common frontend tools and recursive scanning of directories looking for
- * extensions.
- *
- * @see \Drupal\Core\File\FileSystemInterface::scanDirectory()
- * @see \Drupal\Core\Extension\ExtensionDiscovery::scanDirectory()
- */
-$settings['file_scan_ignore_directories'] = [
-  'node_modules',
-  'bower_components',
-];
-
-/**
- * The default number of entities to update in a batch process.
- *
- * This is used by update and post-update functions that need to go through and
- * change all the entities on a site, so it is useful to increase this number
- * if your hosting configuration (i.e. RAM allocation, CPU speed) allows for a
- * larger number of entities to be processed in a single batch run.
- */
-$settings['entity_update_batch_size'] = 50;
-
-/**
- * Entity update backup.
- *
- * This is used to inform the entity storage handler that the backup tables as
- * well as the original entity type and field storage definitions should be
- * retained after a successful entity update process.
- */
-$settings['entity_update_backup'] = TRUE;
-
-/**
- * Node migration type.
- *
- * This is used to force the migration system to use the classic node migrations
- * instead of the default complete node migrations. The migration system will
- * use the classic node migration only if there are existing migrate_map tables
- * for the classic node migrations and they contain data. These tables may not
- * exist if you are developing custom migrations and do not want to use the
- * complete node migrations. Set this to TRUE to force the use of the classic
- * node migrations.
- */
-$settings['migrate_node_migrate_type_classic'] = FALSE;
-
-/**
- * Load local development override configuration, if available.
- *
- * Use settings.local.php to override variables on secondary (staging,
- * development, etc) installations of this site. Typically used to disable
- * caching, JavaScript/CSS compression, re-routing of outgoing emails, and
- * other things that should not happen on development and testing sites.
- *
- * Keep this code block at the end of this file to take full effect.
- */
- // $databases['default']['default'] = array (
- //   'database' => 'dbs669594',
- //   'username' => 'dbu844744',
- //   'password' => 'QUAU76lE3fh9xRobGu!',
- //   'prefix' => '',
- //   'host' => 'db5000733797.hosting-data.io',
- //   'port' => '3306',
- //   'namespace' => 'Drupal\\Core\\Database\\Driver\\mysql',
- //   'driver' => 'mysql',
- // );
-#
-# if (file_exists($app_root . '/' . $site_path . '/settings.local.php')) {
-#   include $app_root . '/' . $site_path . '/settings.local.php';
-# }