proxmox-postinstall

proxmox post install ovh soyoustart

zfs

https://www.ma-solution.fr/ovh-soyoustart-cree-un-partition-zfs-sur-un-serveur-dedie/

stop proxomox

systemctl stop pvestatd
systemctl stop pvedaemon
systemctl stop pve-cluster
systemctl stop corosync
systemctl stop pve-ha-crm
systemctl stop pve-ha-lrm
systemctl stop pveproxy
systemctl stop pve-manager

remove lvm

lsblk
umount /var/lib/vz
lsblk

lvdisplay
lvremove /dev/vg/data

remove mdadm

cat /proc/mdstat
mdadm --misc --stop /dev/md5
# mdadm –-remove /dev/md5
# mdadm –-zero-superblock /dev/sda5
# mdadm –-zero-superblock /dev/sdb5

# vérifier la conf
vim /etc/mdadm/mdadm.conf
# replace
ARRAY /dev/md/md5  metadata=1.2 UUID=461c077c:881eadad:8f65ec33:4ddc17e0 name=md5
# by
ARRAY <ignore> UUID=461c077c:881eadad:8f65ec33:4ddc17e0

# then run 
update-initramfs -u

# enlever le point de montage automatique
vim /etc/fstab

create zfs

zpool create -f -o ashift=12 rpool mirror /dev/sda5 /dev/sdb5
zfs set compression=lz4 rpool
zfs set atime=off rpool

systemctl enable zfs-import@rpool.service

zpool list
zpool status

# Organiser votre pool avec un sous volume ZFS
zfs create rpool/vz
zfs list

#re-définir le point de montage local par défaut pour Proxmox :
zfs set mountpoint=/var/lib/vz rpool/vz

#monter automatiquement les volumes ZFS :
zfs mount -a;

zfs get mounted,canmount,mountpoint rpool/vz

restart proxmox

systemctl start pvestatd
systemctl start pvedaemon
systemctl start pve-cluster
systemctl start corosync
systemctl start pve-ha-crm
systemctl start pve-ha-lrm
systemctl start pveproxy
systemctl start pve-manager

vzdump conf

vzdump default settings

tmpdir: /var/lib/vz #dumpdir: DIR #storage: STORAGE_ID #mode: snapshot|suspend|stop #bwlimit: KBPS #ionice: PRI #lockwait: MINUTES #stopwait: MINUTES #stdexcludes: BOOLEAN #mailto: ADDRESSLIST #prune-backups: keep-INTERVAL=N[,...] #script: FILENAME #exclude-path: PATHLIST #pigz: N notes-template: {{guestname}}-{{node}}

# lxc setting

For version >= 6.5.x the simple approach is edit /etc/pve/nodes/ns316107/lxc/VMID.conf then enter this line:

lxc.prlimit.nofile: 150000 ```

Then .. restart the CT.