the all thing is working !

vl53l0x/vl53l0x.ino

@@ -0,0 +1,46 @@
+
+/* This example shows how to use continuous mode to take
+range measurements with the VL53L0X. It is based on
+vl53l0x_ContinuousRanging_Example.c from the VL53L0X API.
+
+The range readings are in units of mm. */
+
+#include <Wire.h>
+#include <VL53L0X.h>
+
+VL53L0X sensor;
+
+void setup()
+{
+  Serial.begin(9600);
+
+  // wait until serial port opens for native USB devices
+  while (! Serial) {
+    delay(1);
+  }
+
+
+  Wire.begin();
+
+  sensor.setTimeout(500);
+  if (!sensor.init())
+  {
+    Serial.println("Failed to detect and initialize sensor!");
+    while (1) {}
+  }
+
+  // Start continuous back-to-back mode (take readings as
+  // fast as possible).  To use continuous timed mode
+  // instead, provide a desired inter-measurement period in
+  // ms (e.g. sensor.startContinuous(100)).
+  sensor.startContinuous();
+}
+
+void loop()
+{
+  Serial.println("loop");
+  Serial.println(sensor.readRangeContinuousMillimeters());
+  // if (sensor.timeoutOccurred()) { Serial.print(" TIMEOUT"); }
+
+  // Serial.println();
+}